2008 Hyundai Accent vs. 2000 Toyota Mark II
To start off, 2008 Hyundai Accent is newer by 8 year(s). Which means there will be less support and parts availability for 2000 Toyota Mark II. In addition, the cost of maintenance, including insurance, on 2000 Toyota Mark II would be higher. At 1,988 cc (6 cylinders), 2000 Toyota Mark II is equipped with a bigger engine. In terms of performance, 2000 Toyota Mark II (156 HP @ 6200 RPM) has 46 more horse power than 2008 Hyundai Accent. (110 HP @ 6000 RPM) In normal driving conditions, 2000 Toyota Mark II should accelerate faster than 2008 Hyundai Accent. With that said, vehicle weight also plays an important factor in acceleration. 2000 Toyota Mark II weights approximately 360 kg more than 2008 Hyundai Accent. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2000 Toyota Mark II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Toyota Mark II. However, in wet, icy, snow, or gravel driving conditions, 2008 Hyundai Accent, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Toyota Mark II (200 Nm @ 4400 RPM) has 56 more torque (in Nm) than 2008 Hyundai Accent. (144 Nm @ 4500 RPM). This means 2000 Toyota Mark II will have an easier job in driving up hills or pulling heavy equipment than 2008 Hyundai Accent. 2000 Toyota Mark II has automatic transmission and 2008 Hyundai Accent has manual transmission. 2008 Hyundai Accent will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Toyota Mark II will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Hyundai Accent | 2000 Toyota Mark II | |
Make | Hyundai | Toyota |
Model | Accent | Mark II |
Year Released | 2008 | 2000 |
Engine Position | Front | Front |
Engine Size | 1599 cc | 1988 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 110 HP | 156 HP |
Engine RPM | 6000 RPM | 6200 RPM |
Torque | 144 Nm | 200 Nm |
Torque RPM | 4500 RPM | 4400 RPM |
Engine Bore Size | 76.6 mm | 75 mm |
Engine Stroke Size | 87 mm | 75 mm |
Engine Compression Ratio | 10.0:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 5 doors |
Vehicle Weight | 1050 kg | 1410 kg |
Vehicle Length | 4290 mm | 4780 mm |
Vehicle Width | 1700 mm | 1770 mm |
Vehicle Height | 1480 mm | 1480 mm |
Wheelbase Size | 2510 mm | 2810 mm |
Fuel Consumption Overall | 6.4 L/100km | 6.9 L/100km |
Fuel Tank Capacity | 45 L | 73 L |