2008 Isuzu I-290 vs. 1990 Toyota MR2
To start off, 2008 Isuzu I-290 is newer by 18 year(s). Which means there will be less support and parts availability for 1990 Toyota MR2. In addition, the cost of maintenance, including insurance, on 1990 Toyota MR2 would be higher. At 2,901 cc (4 cylinders), 2008 Isuzu I-290 is equipped with a bigger engine. In terms of performance, 2008 Isuzu I-290 (185 HP @ 5600 RPM) has 50 more horse power than 1990 Toyota MR2. (135 HP @ 5600 RPM). In normal driving conditions, 2008 Isuzu I-290 should accelerate faster than 1990 Toyota MR2.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Isuzu I-290 (258 Nm @ 2800 RPM) has 62 more torque (in Nm) than 1990 Toyota MR2. (196 Nm @ 4400 RPM). This means 2008 Isuzu I-290 will have an easier job in driving up hills or pulling heavy equipment than 1990 Toyota MR2.
Compare all specifications:
2008 Isuzu I-290 | 1990 Toyota MR2 | |
Make | Isuzu | Toyota |
Model | I-290 | MR2 |
Year Released | 2008 | 1990 |
Engine Position | Front | Middle |
Engine Size | 2901 cc | 2164 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 185 HP | 135 HP |
Engine RPM | 5600 RPM | 5600 RPM |
Torque | 258 Nm | 196 Nm |
Torque RPM | 2800 RPM | 4400 RPM |
Engine Compression Ratio | 10.3:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Length | 5270 mm | 4190 mm |
Vehicle Width | 1720 mm | 1710 mm |
Vehicle Height | 1650 mm | 1250 mm |
Wheelbase Size | 3210 mm | 2610 mm |
Fuel Tank Capacity | 74 L | 70 L |