2008 Isuzu I-290 vs. 2005 Porsche 996

To start off, 2008 Isuzu I-290 is newer by 3 year(s). Which means there will be less support and parts availability for 2005 Porsche 996. In addition, the cost of maintenance, including insurance, on 2005 Porsche 996 would be higher. At 3,589 cc (6 cylinders), 2005 Porsche 996 is equipped with a bigger engine. In terms of performance, 2005 Porsche 996 (315 HP @ 6600 RPM) has 130 more horse power than 2008 Isuzu I-290. (185 HP @ 5600 RPM) In normal driving conditions, 2005 Porsche 996 should accelerate faster than 2008 Isuzu I-290.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Porsche 996 (400 Nm @ 4600 RPM) has 142 more torque (in Nm) than 2008 Isuzu I-290. (258 Nm @ 2800 RPM). This means 2005 Porsche 996 will have an easier job in driving up hills or pulling heavy equipment than 2008 Isuzu I-290.

Compare all specifications:

2008 Isuzu I-290 2005 Porsche 996
Make Isuzu Porsche
Model I-290 996
Year Released 2008 2005
Engine Position Front Rear
Engine Size 2901 cc 3589 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line boxer
Horse Power 185 HP 315 HP
Engine RPM 5600 RPM 6600 RPM
Torque 258 Nm 400 Nm
Torque RPM 2800 RPM 4600 RPM
Engine Compression Ratio 10.3:1 9.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Length 5270 mm 4440 mm
Vehicle Width 1720 mm 1770 mm
Vehicle Height 1650 mm 1310 mm
Wheelbase Size 3210 mm 2360 mm
Fuel Tank Capacity 74 L 64 L