2008 Jaguar X-Type vs. 2010 Fiat Ulysse
To start off, 2010 Fiat Ulysse is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Jaguar X-Type. In addition, the cost of maintenance, including insurance, on 2008 Jaguar X-Type would be higher. At 2,946 cc (6 cylinders), 2010 Fiat Ulysse is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2010 Fiat Ulysse weights approximately 352 kg more than 2008 Jaguar X-Type.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Fiat Ulysse (285 Nm @ 3750 RPM) has 85 more torque (in Nm) than 2008 Jaguar X-Type. (200 Nm @ 4100 RPM). This means 2010 Fiat Ulysse will have an easier job in driving up hills or pulling heavy equipment than 2008 Jaguar X-Type.
Compare all specifications:
| 2008 Jaguar X-Type | 2010 Fiat Ulysse | |
| Make | Jaguar | Fiat |
| Model | X-Type | Ulysse |
| Year Released | 2008 | 2010 |
| Body Type | Sedan | Minivan |
| Engine Position | Front | Front |
| Engine Size | 2099 cc | 2946 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Horse Power | 0 HP | 201 HP |
| Torque | 200 Nm | 285 Nm |
| Torque RPM | 4100 RPM | 3750 RPM |
| Engine Compression Ratio | 10.8:1 | 11.0:1 |
| Fuel Type | Gasoline | Gasoline - Premium |
| Top Speed | 205 km/hour | 205 km/hour |
| Acceleration 0-100mph | 10.8 seconds | 10.5 seconds |
| Drive Type | Front | Front |
| Transmission Type | Automatic | Automatic |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 1485 kg | 1837 kg |
| Vehicle Length | 4910 mm | 4730 mm |
| Vehicle Height | 1450 mm | 1760 mm |
| Wheelbase Size | 2720 mm | 2830 mm |
| Fuel Consumption Overall | 10 L/100km | 11.5 L/100km |
| Fuel Tank Capacity | 61 L | 80 L |
