2008 Jeep Wrangler vs. 1958 Rover P4
To start off, 2008 Jeep Wrangler is newer by 50 year(s). Which means there will be less support and parts availability for 1958 Rover P4. In addition, the cost of maintenance, including insurance, on 1958 Rover P4 would be higher. At 3,966 cc (6 cylinders), 2008 Jeep Wrangler is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Jeep Wrangler weights approximately 150 kg more than 1958 Rover P4.
Because 2008 Jeep Wrangler is four wheel drive (4WD), it will have significant more traction and grip than 1958 Rover P4. In wet, icy, snow, or gravel driving conditions, 2008 Jeep Wrangler will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Jeep Wrangler (296 Nm @ 3500 RPM) has 143 more torque (in Nm) than 1958 Rover P4. (153 Nm @ 1750 RPM). This means 2008 Jeep Wrangler will have an easier job in driving up hills or pulling heavy equipment than 1958 Rover P4.
Compare all specifications:
2008 Jeep Wrangler | 1958 Rover P4 | |
Make | Jeep | Rover |
Model | Wrangler | P4 |
Year Released | 2008 | 1958 |
Engine Position | Front | Front |
Engine Size | 3966 cc | 2230 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 0 HP | 70 HP |
Torque | 296 Nm | 153 Nm |
Torque RPM | 3500 RPM | 1750 RPM |
Engine Bore Size | 98.4 mm | 73 mm |
Engine Stroke Size | 86.7 mm | 88.9 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 4 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1550 kg | 1400 kg |
Vehicle Length | 3950 mm | 4540 mm |
Vehicle Width | 1740 mm | 1680 mm |
Vehicle Height | 1810 mm | 1620 mm |
Wheelbase Size | 2380 mm | 2830 mm |
Fuel Tank Capacity | 72 L | 45 L |