2008 Jeep Wrangler vs. 1974 Steyr Haflinger

To start off, 2008 Jeep Wrangler is newer by 34 year(s). Which means there will be less support and parts availability for 1974 Steyr Haflinger. In addition, the cost of maintenance, including insurance, on 1974 Steyr Haflinger would be higher. At 3,778 cc (6 cylinders), 2008 Jeep Wrangler is equipped with a bigger engine. In terms of performance, 2008 Jeep Wrangler (202 HP @ 5200 RPM) has 175 more horse power than 1974 Steyr Haflinger. (27 HP @ 4800 RPM). In normal driving conditions, 2008 Jeep Wrangler should accelerate faster than 1974 Steyr Haflinger. With that said, vehicle weight also plays an important factor in acceleration. 2008 Jeep Wrangler weights approximately 1299 kg more than 1974 Steyr Haflinger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Jeep Wrangler (321 Nm @ 4000 RPM) has 275 more torque (in Nm) than 1974 Steyr Haflinger. (46 Nm @ 3500 RPM). This means 2008 Jeep Wrangler will have an easier job in driving up hills or pulling heavy equipment than 1974 Steyr Haflinger.

Compare all specifications:

2008 Jeep Wrangler 1974 Steyr Haflinger
Make Jeep Steyr
Model Wrangler Haflinger
Year Released 2008 1974
Engine Size 3778 cc 643 cc
Engine Cylinders 6 cylinders 2 cylinders
Engine Type V in-line
Horse Power 202 HP 27 HP
Engine RPM 5200 RPM 4800 RPM
Torque 321 Nm 46 Nm
Torque RPM 4000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 1949 kg 650 kg
Vehicle Length 3890 mm 2860 mm
Vehicle Width 1880 mm 1410 mm
Vehicle Height 1810 mm 1750 mm
Wheelbase Size 2430 mm 1510 mm