2008 Kia Rio vs. 2008 Toyota Stallion
To start off, both 2008 Kia Rio and 2008 Toyota Stallion were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,812 cc, 2008 Toyota Stallion is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Stallion weights approximately 28 kg more than 2008 Kia Rio.
Because 2008 Toyota Stallion is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Toyota Stallion. However, in wet, icy, snow, or gravel driving conditions, 2008 Kia Rio, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Kia Rio (145 Nm @ 4500 RPM) has 10 more torque (in Nm) than 2008 Toyota Stallion. (135 Nm @ 2400 RPM). This means 2008 Kia Rio will have an easier job in driving up hills or pulling heavy equipment than 2008 Toyota Stallion.
Compare all specifications:
2008 Kia Rio | 2008 Toyota Stallion | |
Make | Kia | Toyota |
Model | Rio | Stallion |
Year Released | 2008 | 2008 |
Engine Position | Front | Front |
Engine Size | 1599 cc | 1812 cc |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 110 HP | 0 HP |
Torque | 145 Nm | 135 Nm |
Torque RPM | 4500 RPM | 2400 RPM |
Engine Compression Ratio | 10.0:1 | 9.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 3 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1290 kg | 1318 kg |
Vehicle Length | 4250 mm | 4790 mm |
Vehicle Height | 1480 mm | 1770 mm |
Wheelbase Size | 2510 mm | 2660 mm |
Fuel Consumption Overall | 8.1 L/100km | 8.1 L/100km |
Fuel Tank Capacity | 45 L | 70 L |