2008 Mazda 3 vs. 1955 Studebaker President State

To start off, 2008 Mazda 3 is newer by 53 year(s). Which means there will be less support and parts availability for 1955 Studebaker President State. In addition, the cost of maintenance, including insurance, on 1955 Studebaker President State would be higher. At 4,244 cc (8 cylinders), 1955 Studebaker President State is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1955 Studebaker President State weights approximately 370 kg more than 2008 Mazda 3.

Because 1955 Studebaker President State is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Studebaker President State. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Studebaker President State (353 Nm) has 207 more torque (in Nm) than 2008 Mazda 3. (146 Nm). This means 1955 Studebaker President State will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

2008 Mazda 3 1955 Studebaker President State
Make Mazda Studebaker
Model 3 President State
Year Released 2008 1955
Engine Position Front Front
Engine Size 1597 cc 4244 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 0 HP 174 HP
Torque 146 Nm 353 Nm
Engine Bore Size 78 mm 90.5 mm
Engine Stroke Size 83.6 mm 82.6 mm
Engine Compression Ratio 10.0:1 8.5:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Vehicle Weight 1180 kg 1550 kg
Vehicle Length 4500 mm 5250 mm
Vehicle Width 1760 mm 1770 mm
Vehicle Height 1470 mm 1530 mm
Wheelbase Size 2650 mm 3070 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]