2008 Mazda 3 vs. 1966 Simca 1300

To start off, 2008 Mazda 3 is newer by 42 year(s). Which means there will be less support and parts availability for 1966 Simca 1300. In addition, the cost of maintenance, including insurance, on 1966 Simca 1300 would be higher. At 1,598 cc, 2008 Mazda 3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 190 kg more than 1966 Simca 1300.

Because 1966 Simca 1300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Simca 1300. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (146 Nm @ 4000 RPM) has 44 more torque (in Nm) than 1966 Simca 1300. (102 Nm @ 2600 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1966 Simca 1300.

Compare all specifications:

2008 Mazda 3 1966 Simca 1300
Make Mazda Simca
Model 3 1300
Year Released 2008 1966
Engine Position Front Rear
Engine Size 1598 cc 1289 cc
Valves per Cylinder 4 valves 2 valves
Horse Power 0 HP 51 HP
Torque 146 Nm 102 Nm
Torque RPM 4000 RPM 2600 RPM
Engine Bore Size 78 mm 74 mm
Engine Stroke Size 83.6 mm 75 mm
Engine Compression Ratio 10.0:1 9.3:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1180 kg 990 kg
Vehicle Length 4500 mm 4250 mm
Vehicle Width 1760 mm 1580 mm
Vehicle Height 1470 mm 1430 mm
Wheelbase Size 2650 mm 2530 mm
Fuel Tank Capacity 55 L 60 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]