2008 Mazda 3 vs. 1992 Oldsmobile Custom Cruiser
To start off, 2008 Mazda 3 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Oldsmobile Custom Cruiser. In addition, the cost of maintenance, including insurance, on 1992 Oldsmobile Custom Cruiser would be higher. At 5,002 cc (8 cylinders), 1992 Oldsmobile Custom Cruiser is equipped with a bigger engine. In terms of performance, 1992 Oldsmobile Custom Cruiser (168 HP @ 4200 RPM) has 20 more horse power than 2008 Mazda 3. (148 HP @ 6500 RPM) In normal driving conditions, 1992 Oldsmobile Custom Cruiser should accelerate faster than 2008 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1992 Oldsmobile Custom Cruiser weights approximately 686 kg more than 2008 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1992 Oldsmobile Custom Cruiser is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1992 Oldsmobile Custom Cruiser. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1992 Oldsmobile Custom Cruiser (346 Nm @ 2400 RPM) has 163 more torque (in Nm) than 2008 Mazda 3. (183 Nm @ 4500 RPM). This means 1992 Oldsmobile Custom Cruiser will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3. 1992 Oldsmobile Custom Cruiser has automatic transmission and 2008 Mazda 3 has manual transmission. 2008 Mazda 3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1992 Oldsmobile Custom Cruiser will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Mazda 3 | 1992 Oldsmobile Custom Cruiser | |
| Make | Mazda | Oldsmobile |
| Model | 3 | Custom Cruiser |
| Year Released | 2008 | 1992 |
| Engine Position | Front | Front |
| Engine Size | 1999 cc | 5002 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 148 HP | 168 HP |
| Engine RPM | 6500 RPM | 4200 RPM |
| Torque | 183 Nm | 346 Nm |
| Torque RPM | 4500 RPM | 2400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Vehicle Weight | 1329 kg | 2015 kg |
| Vehicle Length | 4510 mm | 5530 mm |
| Vehicle Width | 1760 mm | 2030 mm |
| Vehicle Height | 1470 mm | 1540 mm |
| Wheelbase Size | 2650 mm | 2950 mm |
