2008 Mazda 3 vs. 1992 Rover 216

To start off, 2008 Mazda 3 is newer by 16 year(s). Which means there will be less support and parts availability for 1992 Rover 216. In addition, the cost of maintenance, including insurance, on 1992 Rover 216 would be higher. At 1,594 cc (4 cylinders), 2008 Mazda 3 is equipped with a bigger engine. In terms of performance, 1992 Rover 216 (122 HP @ 6800 RPM) has 18 more horse power than 2008 Mazda 3. (104 HP @ 5500 RPM) In normal driving conditions, 1992 Rover 216 should accelerate faster than 2008 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 170 kg more than 1992 Rover 216.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (145 Nm @ 4000 RPM) has 5 more torque (in Nm) than 1992 Rover 216. (140 Nm @ 5700 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 1992 Rover 216.

Compare all specifications:

2008 Mazda 3 1992 Rover 216
Make Mazda Rover
Model 3 216
Year Released 2008 1992
Engine Position Front Front
Engine Size 1594 cc 1590 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 104 HP 122 HP
Engine RPM 5500 RPM 6800 RPM
Torque 145 Nm 140 Nm
Torque RPM 4000 RPM 5700 RPM
Engine Bore Size 78 mm 75 mm
Engine Stroke Size 83.6 mm 90 mm
Engine Compression Ratio 10.0:1 9.5:1
Top Speed 182 km/hour 200 km/hour
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Number of Doors 5 doors 3 doors
Vehicle Weight 1260 kg 1090 kg
Vehicle Length 4430 mm 4260 mm
Vehicle Width 1760 mm 1690 mm
Vehicle Height 1470 mm 1380 mm
Wheelbase Size 2650 mm 2560 mm
Fuel Tank Capacity 55 L 55 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]