2008 Mazda 3 vs. 2004 MG ZT

To start off, 2008 Mazda 3 is newer by 4 year(s). Which means there will be less support and parts availability for 2004 MG ZT. In addition, the cost of maintenance, including insurance, on 2004 MG ZT would be higher. At 1,999 cc (4 cylinders), 2008 Mazda 3 is equipped with a bigger engine. In terms of performance, 2004 MG ZT (158 HP @ 5500 RPM) has 10 more horse power than 2008 Mazda 3. (148 HP @ 6500 RPM) In normal driving conditions, 2004 MG ZT should accelerate faster than 2008 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 2004 MG ZT weights approximately 156 kg more than 2008 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2004 MG ZT (215 Nm @ 2100 RPM) has 32 more torque (in Nm) than 2008 Mazda 3. (183 Nm @ 4500 RPM). This means 2004 MG ZT will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

2008 Mazda 3 2004 MG ZT
Make Mazda MG
Model 3 ZT
Year Released 2008 2004
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 1999 cc 1796 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 148 HP 158 HP
Engine RPM 6500 RPM 5500 RPM
Torque 183 Nm 215 Nm
Torque RPM 4500 RPM 2100 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1329 kg 1485 kg
Vehicle Length 4510 mm 4760 mm
Vehicle Width 1760 mm 1790 mm
Vehicle Height 1470 mm 1440 mm
Wheelbase Size 2650 mm 2760 mm