2008 Mazda 6 vs. 1993 Mazda AZ-1

To start off, 2008 Mazda 6 is newer by 15 year(s). Which means there will be less support and parts availability for 1993 Mazda AZ-1. In addition, the cost of maintenance, including insurance, on 1993 Mazda AZ-1 would be higher. At 2,966 cc (6 cylinders), 2008 Mazda 6 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 6 weights approximately 358 kg more than 1993 Mazda AZ-1.

Because 1993 Mazda AZ-1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mazda AZ-1. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 6 (267 Nm) has 182 more torque (in Nm) than 1993 Mazda AZ-1. (85 Nm). This means 2008 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 1993 Mazda AZ-1.

Compare all specifications:

2008 Mazda 6 1993 Mazda AZ-1
Make Mazda Mazda
Model 6 AZ-1
Year Released 2008 1993
Body Type Sedan Coupe
Engine Position Front Middle
Engine Size 2966 cc 657 cc
Engine Cylinders 6 cylinders 3 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 212 HP 0 HP
Torque 267 Nm 85 Nm
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1192 kg 834 kg
Vehicle Length 4750 mm 3300 mm
Vehicle Width 1790 mm 1400 mm
Vehicle Height 1450 mm 1160 mm
Wheelbase Size 2680 mm 2240 mm