2008 Mazda 6 vs. 2010 BMW 325

To start off, 2010 BMW 325 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Mazda 6. In addition, the cost of maintenance, including insurance, on 2008 Mazda 6 would be higher. At 2,494 cc (6 cylinders), 2010 BMW 325 is equipped with a bigger engine. In terms of performance, 2010 BMW 325 (215 HP @ 6100 RPM) has 59 more horse power than 2008 Mazda 6. (156 HP @ 6500 RPM) In normal driving conditions, 2010 BMW 325 should accelerate faster than 2008 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 2010 BMW 325 weights approximately 365 kg more than 2008 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 BMW 325 (271 Nm @ 4200 RPM) has 62 more torque (in Nm) than 2008 Mazda 6. (209 Nm @ 4000 RPM). This means 2010 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 6. 2008 Mazda 6 has automatic transmission and 2010 BMW 325 has manual transmission. 2010 BMW 325 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Mazda 6 2010 BMW 325
Make Mazda BMW
Model 6 325
Year Released 2008 2010
Body Type Sedan Station Wagon
Engine Position Front Front
Engine Size 2260 cc 2494 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 156 HP 215 HP
Engine RPM 6500 RPM 6100 RPM
Torque 209 Nm 271 Nm
Torque RPM 4000 RPM 4200 RPM
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1180 kg 1545 kg
Vehicle Length 4750 mm 4230 mm
Vehicle Width 1790 mm 1820 mm
Vehicle Height 1450 mm 1420 mm
Wheelbase Size 2680 mm 2770 mm
Fuel Consumption Overall 10 L/100km 8.6 L/100km
Fuel Tank Capacity 68 L 63 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]