2008 Mazda DrifterX vs. 2008 Mazda 3

To start off, both 2008 Mazda DrifterX and 2008 Mazda 3 were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,497 cc (4 cylinders), 2008 Mazda DrifterX is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda DrifterX weights approximately 240 kg more than 2008 Mazda 3.

Because 2008 Mazda DrifterX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mazda DrifterX. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda DrifterX (257 Nm @ 2000 RPM) has 17 more torque (in Nm) than 2008 Mazda 3. (240 Nm @ 1750 RPM). This means 2008 Mazda DrifterX will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.

Compare all specifications:

2008 Mazda DrifterX 2008 Mazda 3
Make Mazda Mazda
Model DrifterX 3
Year Released 2008 2008
Engine Position Front Front
Engine Size 2497 cc 1560 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 3 valves 4 valves
Horse Power 0 HP 108 HP
Torque 257 Nm 240 Nm
Torque RPM 2000 RPM 1750 RPM
Engine Compression Ratio 21.6:1 18.3:1
Fuel Type Diesel Diesel
Acceleration 0-100mph 15 seconds 11.3 seconds
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1480 kg 1240 kg
Vehicle Length 4500 mm 4500 mm
Vehicle Height 1760 mm 1470 mm
Wheelbase Size 3010 mm 2650 mm
Fuel Consumption Overall 12.5 L/100km 5 L/100km
Fuel Tank Capacity 82 L 55 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]