2008 Mazda Etude vs. 2011 BMW 325

To start off, 2011 BMW 325 is newer by 3 year(s). Which means there will be less support and parts availability for 2008 Mazda Etude. In addition, the cost of maintenance, including insurance, on 2008 Mazda Etude would be higher. At 2,494 cc (6 cylinders), 2011 BMW 325 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2011 BMW 325 weights approximately 387 kg more than 2008 Mazda Etude.

Because 2011 BMW 325 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 BMW 325. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda Etude, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 BMW 325 (245 Nm @ 3500 RPM) has 82 more torque (in Nm) than 2008 Mazda Etude. (163 Nm @ 4000 RPM). This means 2011 BMW 325 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda Etude.

Compare all specifications:

2008 Mazda Etude 2011 BMW 325
Make Mazda BMW
Model Etude 325
Year Released 2008 2011
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 1839 cc 2494 cc
Valves per Cylinder 4 valves 4 valves
Horse Power 0 HP 190 HP
Torque 163 Nm 245 Nm
Torque RPM 4000 RPM 3500 RPM
Engine Bore Size 83 mm 84 mm
Engine Stroke Size 85 mm 75 mm
Engine Compression Ratio 9.6:1 11.0:1
Top Speed 194 km/hour 235 km/hour
Acceleration 0-100mph 10.7 seconds 7.1 seconds
Drive Type Front Rear
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 3 doors
Vehicle Weight 1093 kg 1480 kg
Wheelbase Size 2620 mm 2730 mm
Fuel Consumption Overall 7.5 L/100km 9 L/100km
Fuel Tank Capacity 55 L 63 L