2008 Mazda MazdaSpeed3 vs. 2010 Maybach 62
To start off, 2010 Maybach 62 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Mazda MazdaSpeed3. In addition, the cost of maintenance, including insurance, on 2008 Mazda MazdaSpeed3 would be higher. At 5,500 cc (12 cylinders), 2010 Maybach 62 is equipped with a bigger engine. In terms of performance, 2010 Maybach 62 (543 HP @ 5250 RPM) has 280 more horse power than 2008 Mazda MazdaSpeed3. (263 HP @ 5500 RPM) In normal driving conditions, 2010 Maybach 62 should accelerate faster than 2008 Mazda MazdaSpeed3. With that said, vehicle weight also plays an important factor in acceleration. 2010 Maybach 62 weights approximately 1696 kg more than 2008 Mazda MazdaSpeed3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Maybach 62 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Maybach 62. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda MazdaSpeed3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Maybach 62 (899 Nm @ 2200 RPM) has 519 more torque (in Nm) than 2008 Mazda MazdaSpeed3. (380 Nm @ 3000 RPM). This means 2010 Maybach 62 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda MazdaSpeed3. 2010 Maybach 62 has automatic transmission and 2008 Mazda MazdaSpeed3 has manual transmission. 2008 Mazda MazdaSpeed3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Maybach 62 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Mazda MazdaSpeed3 | 2010 Maybach 62 | |
| Make | Mazda | Maybach |
| Model | MazdaSpeed3 | 62 |
| Year Released | 2008 | 2010 |
| Body Type | Hatchback | Sedan |
| Engine Position | Front | Front |
| Engine Size | 2260 cc | 5500 cc |
| Engine Cylinders | 4 cylinders | 12 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 3 valves |
| Horse Power | 263 HP | 543 HP |
| Engine RPM | 5500 RPM | 5250 RPM |
| Torque | 380 Nm | 899 Nm |
| Torque RPM | 3000 RPM | 2200 RPM |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 5 doors | 4 doors |
| Vehicle Weight | 1180 kg | 2876 kg |
| Vehicle Length | 4500 mm | 6165 mm |
| Vehicle Width | 1770 mm | 1981 mm |
| Vehicle Height | 1470 mm | 1575 mm |
| Wheelbase Size | 2650 mm | 3828 mm |
| Fuel Consumption | 9.2 L/100km | 14.7 L/100km |
| Fuel Consumption City | 13.2 L/100km | 23.5 L/100km |
| Fuel Tank Capacity | 55 L | 110 L |
