2008 Mazda Rustler vs. 2008 Mazda DrifterX

To start off, both 2008 Mazda Rustler and 2008 Mazda DrifterX were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 2,497 cc (4 cylinders), 2008 Mazda DrifterX is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda DrifterX weights approximately 466 kg more than 2008 Mazda Rustler.

Because 2008 Mazda DrifterX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mazda DrifterX. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda Rustler, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda DrifterX (257 Nm @ 2000 RPM) has 137 more torque (in Nm) than 2008 Mazda Rustler. (120 Nm @ 3800 RPM). This means 2008 Mazda DrifterX will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda Rustler.

Compare all specifications:

2008 Mazda Rustler 2008 Mazda DrifterX
Make Mazda Mazda
Model Rustler DrifterX
Year Released 2008 2008
Engine Size 1586 cc 2497 cc
Valves per Cylinder 2 valves 3 valves
Horse Power 0 HP 0 HP
Torque 120 Nm 257 Nm
Torque RPM 3800 RPM 2000 RPM
Engine Compression Ratio 9.8:1 21.6:1
Fuel Type Gasoline Diesel
Top Speed 165 km/hour 150 km/hour
Acceleration 0-100mph 11.6 seconds 15 seconds
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 3 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1014 kg 1480 kg
Wheelbase Size 2570 mm 3010 mm
Fuel Consumption Overall 11.8 L/100km 12.5 L/100km
Fuel Tank Capacity 54 L 82 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]