2008 Mazda RX-8 vs. 2008 Holden Barina
To start off, both 2008 Mazda RX-8 and 2008 Holden Barina were released in the same year (2008). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 1,598 cc (4 cylinders), 2008 Holden Barina is equipped with a bigger engine.
Because 2008 Mazda RX-8 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mazda RX-8. However, in wet, icy, snow, or gravel driving conditions, 2008 Holden Barina, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda RX-8 (220 Nm @ 5000 RPM) has 23 more torque (in Nm) than 2008 Holden Barina. (197 Nm @ 3600 RPM). This means 2008 Mazda RX-8 will have an easier job in driving up hills or pulling heavy equipment than 2008 Holden Barina.
Compare all specifications:
2008 Mazda RX-8 | 2008 Holden Barina | |
Make | Mazda | Holden |
Model | RX-8 | Barina |
Year Released | 2008 | 2008 |
Body Type | Coupe | Hatchback |
Engine Position | Front | Front |
Engine Size | 1308 cc | 1598 cc |
Engine Type | dual-disk rotary | in-line |
Horse Power | 189 HP | 0 HP |
Torque | 220 Nm | 197 Nm |
Torque RPM | 5000 RPM | 3600 RPM |
Engine Compression Ratio | 10.0:1 | 9.5:1 |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Vehicle Width | 1780 mm | 1650 mm |