2008 Mercedes-Benz CL vs. 2012 Fiat Albea
To start off, 2012 Fiat Albea is newer by 4 year(s). Which means there will be less support and parts availability for 2008 Mercedes-Benz CL. In addition, the cost of maintenance, including insurance, on 2008 Mercedes-Benz CL would be higher. At 5,461 cc (8 cylinders), 2008 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2008 Mercedes-Benz CL (383 HP @ 6000 RPM) has 307 more horse power than 2012 Fiat Albea. (76 HP @ 6000 RPM). In normal driving conditions, 2008 Mercedes-Benz CL should accelerate faster than 2012 Fiat Albea. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz CL weights approximately 844 kg more than 2012 Fiat Albea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 2012 Fiat Albea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz CL (531 Nm @ 2800 RPM) has 416 more torque (in Nm) than 2012 Fiat Albea. (115 Nm @ 3000 RPM). This means 2008 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 2012 Fiat Albea. 2008 Mercedes-Benz CL has automatic transmission and 2012 Fiat Albea has manual transmission. 2012 Fiat Albea will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz CL will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Mercedes-Benz CL | 2012 Fiat Albea | |
| Make | Mercedes-Benz | Fiat |
| Model | CL | Albea |
| Year Released | 2008 | 2012 |
| Body Type | Coupe | Sedan |
| Engine Position | Front | Front |
| Engine Size | 5461 cc | 1368 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 3 valves | 2 valves |
| Horse Power | 383 HP | 76 HP |
| Engine RPM | 6000 RPM | 6000 RPM |
| Torque | 531 Nm | 115 Nm |
| Torque RPM | 2800 RPM | 3000 RPM |
| Fuel Type | Gasoline - Premium | Gasoline |
| Top Speed | 250 km/hour | 162 km/hour |
| Acceleration 0-100mph | 5.4 seconds | 13.5 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1995 kg | 1151 kg |
| Vehicle Length | 5070 mm | 4220 mm |
| Vehicle Width | 1880 mm | 1710 mm |
| Vehicle Height | 1420 mm | 1500 mm |
| Fuel Tank Capacity | 90 L | 51 L |
