2008 Mercedes-Benz E vs. 2006 Peugeot 1007
To start off, 2008 Mercedes-Benz E is newer by 2 year(s). Which means there will be less support and parts availability for 2006 Peugeot 1007. In addition, the cost of maintenance, including insurance, on 2006 Peugeot 1007 would be higher. At 5,439 cc (8 cylinders), 2008 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2008 Mercedes-Benz E (469 HP @ 6100 RPM) has 382 more horse power than 2006 Peugeot 1007. (87 HP @ 5250 RPM). In normal driving conditions, 2008 Mercedes-Benz E should accelerate faster than 2006 Peugeot 1007. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz E weights approximately 827 kg more than 2006 Peugeot 1007. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2006 Peugeot 1007, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz E (700 Nm @ 2650 RPM) has 567 more torque (in Nm) than 2006 Peugeot 1007. (133 Nm @ 3250 RPM). This means 2008 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2006 Peugeot 1007. 2008 Mercedes-Benz E has automatic transmission and 2006 Peugeot 1007 has manual transmission. 2006 Peugeot 1007 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2008 Mercedes-Benz E | 2006 Peugeot 1007 | |
| Make | Mercedes-Benz | Peugeot |
| Model | E | 1007 |
| Year Released | 2008 | 2006 |
| Engine Position | Front | Front |
| Engine Size | 5439 cc | 1360 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 3 valves | 4 valves |
| Horse Power | 469 HP | 87 HP |
| Engine RPM | 6100 RPM | 5250 RPM |
| Torque | 700 Nm | 133 Nm |
| Torque RPM | 2650 RPM | 3250 RPM |
| Engine Bore Size | 97.1 mm | 75 mm |
| Engine Stroke Size | 92 mm | 77 mm |
| Engine Compression Ratio | 9.0:1 | 10.5:1 |
| Fuel Type | Gasoline - Premium | Gasoline - Premium |
| Acceleration 0-100mph | 4.7 seconds | 13.6 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 5 doors | 3 doors |
| Vehicle Weight | 1990 kg | 1163 kg |
| Vehicle Length | 4880 mm | 3740 mm |
| Vehicle Width | 1830 mm | 1670 mm |
| Vehicle Height | 1490 mm | 1630 mm |
| Wheelbase Size | 2860 mm | 2320 mm |
| Fuel Consumption Overall | 13.6 L/100km | 6.4 L/100km |
| Fuel Tank Capacity | 80 L | 40 L |
