2008 Opel Speedster vs. 2010 Peugeot 407

To start off, 2010 Peugeot 407 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Opel Speedster. In addition, the cost of maintenance, including insurance, on 2008 Opel Speedster would be higher. At 2,720 cc (6 cylinders), 2010 Peugeot 407 is equipped with a bigger engine. In terms of performance, 2010 Peugeot 407 (201 HP @ 4000 RPM) has 4 more horse power than 2008 Opel Speedster. (197 HP @ 5500 RPM) In normal driving conditions, 2010 Peugeot 407 should accelerate faster than 2008 Opel Speedster. With that said, vehicle weight also plays an important factor in acceleration. 2010 Peugeot 407 weights approximately 793 kg more than 2008 Opel Speedster. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Opel Speedster is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Opel Speedster. However, in wet, icy, snow, or gravel driving conditions, 2010 Peugeot 407, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Peugeot 407 (440 Nm @ 1900 RPM) has 190 more torque (in Nm) than 2008 Opel Speedster. (250 Nm @ 1950 RPM). This means 2010 Peugeot 407 will have an easier job in driving up hills or pulling heavy equipment than 2008 Opel Speedster. 2010 Peugeot 407 has automatic transmission and 2008 Opel Speedster has manual transmission. 2008 Opel Speedster will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Peugeot 407 will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Opel Speedster 2010 Peugeot 407
Make Opel Peugeot
Model Speedster 407
Year Released 2008 2010
Engine Position Middle Front
Engine Size 1996 cc 2720 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 197 HP 201 HP
Engine RPM 5500 RPM 4000 RPM
Torque 250 Nm 440 Nm
Torque RPM 1950 RPM 1900 RPM
Engine Bore Size 86 mm 81 mm
Engine Stroke Size 86 mm 88 mm
Engine Compression Ratio 8.8:1 17.3:1
Fuel Type Gasoline - Premium Diesel
Top Speed 243 km/hour 230 km/hour
Acceleration 0-100mph 4.9 seconds 8.5 seconds
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 2 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1005 kg 1798 kg
Vehicle Length 3790 mm 4820 mm
Vehicle Width 1710 mm 1410 mm
Vehicle Height 1120 mm 1870 mm
Wheelbase Size 2340 mm 2730 mm
Fuel Consumption Overall 8.5 L/100km 8.5 L/100km
Fuel Tank Capacity 36 L 67 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]