2008 Peugeot 307 vs. 1963 Toyota Crown
To start off, 2008 Peugeot 307 is newer by 45 year(s). Which means there will be less support and parts availability for 1963 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1963 Toyota Crown would be higher. At 1,997 cc, 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 23 kg more than 1963 Toyota Crown.
Because 1963 Toyota Crown is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1963 Toyota Crown. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 307, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 307 (190 Nm @ 4100 RPM) has 38 more torque (in Nm) than 1963 Toyota Crown. (152 Nm @ 2600 RPM). This means 2008 Peugeot 307 will have an easier job in driving up hills or pulling heavy equipment than 1963 Toyota Crown.
Compare all specifications:
2008 Peugeot 307 | 1963 Toyota Crown | |
Make | Peugeot | Toyota |
Model | 307 | Crown |
Year Released | 2008 | 1963 |
Engine Position | Front | Front |
Engine Size | 1997 cc | 1897 cc |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 0 HP | 80 HP |
Torque | 190 Nm | 152 Nm |
Torque RPM | 4100 RPM | 2600 RPM |
Engine Bore Size | 85 mm | 83 mm |
Engine Stroke Size | 88 mm | 85 mm |
Engine Compression Ratio | 10.8:1 | 22.5:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1278 kg | 1255 kg |
Vehicle Length | 4210 mm | 4640 mm |
Vehicle Width | 1740 mm | 1700 mm |
Vehicle Height | 1520 mm | 1470 mm |
Wheelbase Size | 2610 mm | 2700 mm |
Fuel Tank Capacity | 50 L | 75 L |