2008 Peugeot 307 vs. 1967 Riley 4

To start off, 2008 Peugeot 307 is newer by 41 year(s). Which means there will be less support and parts availability for 1967 Riley 4. In addition, the cost of maintenance, including insurance, on 1967 Riley 4 would be higher. At 1,997 cc (4 cylinders), 2008 Peugeot 307 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Peugeot 307 weights approximately 320 kg more than 1967 Riley 4.

Because 1967 Riley 4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1967 Riley 4. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 307, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Peugeot 307 (200 Nm @ 4000 RPM) has 80 more torque (in Nm) than 1967 Riley 4. (120 Nm @ 2500 RPM). This means 2008 Peugeot 307 will have an easier job in driving up hills or pulling heavy equipment than 1967 Riley 4.

Compare all specifications:

2008 Peugeot 307 1967 Riley 4
Make Peugeot Riley
Model 307 4
Year Released 2008 1967
Engine Position Front Front
Engine Size 1997 cc 1622 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 0 HP 67 HP
Torque 200 Nm 120 Nm
Torque RPM 4000 RPM 2500 RPM
Engine Compression Ratio 10.8:1 8.3:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1468 kg 1148 kg
Vehicle Length 4210 mm 4540 mm
Vehicle Width 1740 mm 1620 mm
Vehicle Height 1520 mm 1530 mm
Wheelbase Size 2610 mm 2530 mm
Fuel Tank Capacity 50 L 45 L