2008 Peugeot 607 vs. 2011 Ford Crown Victoria
To start off, 2011 Ford Crown Victoria is newer by 3 year(s). Which means there will be less support and parts availability for 2008 Peugeot 607. In addition, the cost of maintenance, including insurance, on 2008 Peugeot 607 would be higher. At 4,604 cc (8 cylinders), 2011 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2011 Ford Crown Victoria (239 HP @ 4750 RPM) has 78 more horse power than 2008 Peugeot 607. (161 HP @ 5875 RPM) In normal driving conditions, 2011 Ford Crown Victoria should accelerate faster than 2008 Peugeot 607. With that said, vehicle weight also plays an important factor in acceleration. 2011 Ford Crown Victoria weights approximately 1246 kg more than 2008 Peugeot 607. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2011 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 607, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ford Crown Victoria (374 Nm @ 4000 RPM) has 154 more torque (in Nm) than 2008 Peugeot 607. (220 Nm @ 4150 RPM). This means 2011 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2008 Peugeot 607. 2011 Ford Crown Victoria has automatic transmission and 2008 Peugeot 607 has manual transmission. 2008 Peugeot 607 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2008 Peugeot 607 | 2011 Ford Crown Victoria | |
Make | Peugeot | Ford |
Model | 607 | Crown Victoria |
Year Released | 2008 | 2011 |
Body Type | Sedan | Sedan |
Engine Position | Front | Front |
Engine Size | 2228 cc | 4604 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 161 HP | 239 HP |
Engine RPM | 5875 RPM | 4750 RPM |
Torque | 220 Nm | 374 Nm |
Torque RPM | 4150 RPM | 4000 RPM |
Engine Bore Size | 86 mm | 90.2 mm |
Engine Stroke Size | 96 mm | 90 mm |
Engine Compression Ratio | 10.8:1 | 9.4:1 |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1610 kg | 2856 kg |
Vehicle Length | 4910 mm | 5390 mm |
Vehicle Width | 1810 mm | 1970 mm |
Vehicle Height | 1450 mm | 1450 mm |
Wheelbase Size | 2810 mm | 2920 mm |
Fuel Consumption Overall | 9.2 L/100km | 11.8 L/100km |
Fuel Tank Capacity | 80 L | 72 L |