2008 Rover 45 vs. 2010 Mazda 6

To start off, 2010 Mazda 6 is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Rover 45. In addition, the cost of maintenance, including insurance, on 2008 Rover 45 would be higher. At 2,500 cc (4 cylinders), 2010 Mazda 6 is equipped with a bigger engine. In terms of performance, 2010 Mazda 6 (170 HP @ 6000 RPM) has 68 more horse power than 2008 Rover 45. (102 HP @ 6000 RPM) In normal driving conditions, 2010 Mazda 6 should accelerate faster than 2008 Rover 45. With that said, vehicle weight also plays an important factor in acceleration. 2010 Mazda 6 weights approximately 296 kg more than 2008 Rover 45. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 6 (226 Nm @ 4000 RPM) has 103 more torque (in Nm) than 2008 Rover 45. (123 Nm @ 4500 RPM). This means 2010 Mazda 6 will have an easier job in driving up hills or pulling heavy equipment than 2008 Rover 45.

Compare all specifications:

2008 Rover 45 2010 Mazda 6
Make Rover Mazda
Model 45 6
Year Released 2008 2010
Engine Position Front Front
Engine Size 1396 cc 2500 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 102 HP 170 HP
Engine RPM 6000 RPM 6000 RPM
Torque 123 Nm 226 Nm
Torque RPM 4500 RPM 4000 RPM
Fuel Type Gasoline - Premium Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1182 kg 1478 kg
Vehicle Length 4370 mm 4920 mm
Vehicle Width 1700 mm 1839 mm
Vehicle Height 1400 mm 1471 mm
Wheelbase Size 2630 mm 2789 mm
Fuel Tank Capacity 55 L 70 L