2008 Rover 75 vs. 1957 Rover P4
To start off, 2008 Rover 75 is newer by 51 year(s). Which means there will be less support and parts availability for 1957 Rover P4. In addition, the cost of maintenance, including insurance, on 1957 Rover P4 would be higher. At 2,636 cc (6 cylinders), 1957 Rover P4 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Rover 75 weights approximately 105 kg more than 1957 Rover P4.
Because 1957 Rover P4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1957 Rover P4. However, in wet, icy, snow, or gravel driving conditions, 2008 Rover 75, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Rover 75 (240 Nm @ 4000 RPM) has 34 more torque (in Nm) than 1957 Rover P4. (206 Nm @ 2500 RPM). This means 2008 Rover 75 will have an easier job in driving up hills or pulling heavy equipment than 1957 Rover P4.
Compare all specifications:
| 2008 Rover 75 | 1957 Rover P4 | |
| Make | Rover | Rover |
| Model | 75 | P4 |
| Year Released | 2008 | 1957 |
| Engine Size | 2497 cc | 2636 cc |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 0 HP | 93 HP |
| Torque | 240 Nm | 206 Nm |
| Torque RPM | 4000 RPM | 2500 RPM |
| Engine Bore Size | 80 mm | 73 mm |
| Engine Stroke Size | 82.8 mm | 105 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1535 kg | 1430 kg |
| Vehicle Length | 4000 mm | 4550 mm |
| Vehicle Height | 1420 mm | 1620 mm |
| Wheelbase Size | 2750 mm | 2830 mm |
| Fuel Tank Capacity | 65 L | 52 L |
