2008 Toyota Stallion vs. 2011 Ascari A10
To start off, 2011 Ascari A10 is newer by 3 year(s). Which means there will be less support and parts availability for 2008 Toyota Stallion. In addition, the cost of maintenance, including insurance, on 2008 Toyota Stallion would be higher. At 4,941 cc (8 cylinders), 2011 Ascari A10 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Toyota Stallion weights approximately 38 kg more than 2011 Ascari A10.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ascari A10 (560 Nm @ 5500 RPM) has 425 more torque (in Nm) than 2008 Toyota Stallion. (135 Nm @ 2400 RPM). This means 2011 Ascari A10 will have an easier job in driving up hills or pulling heavy equipment than 2008 Toyota Stallion.
Compare all specifications:
| 2008 Toyota Stallion | 2011 Ascari A10 | |
| Make | Toyota | Ascari |
| Model | Stallion | A10 |
| Year Released | 2008 | 2011 |
| Engine Position | Front | Middle |
| Engine Size | 1812 cc | 4941 cc |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 0 HP | 625 HP |
| Torque | 135 Nm | 560 Nm |
| Torque RPM | 2400 RPM | 5500 RPM |
| Engine Bore Size | 86 mm | 94 mm |
| Engine Stroke Size | 78 mm | 89 mm |
| Engine Compression Ratio | 9.0:1 | 11.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Number of Seats | 3 seats | 2 seats |
| Number of Doors | 5 doors | 2 doors |
| Vehicle Weight | 1318 kg | 1280 kg |
| Vehicle Length | 4790 mm | 4300 mm |
| Vehicle Height | 1770 mm | 1138 mm |
| Wheelbase Size | 2660 mm | 2636 mm |
