2009 Alpina B3 vs. 1990 Pontiac Trans Am

To start off, 2009 Alpina B3 is newer by 19 year(s). Which means there will be less support and parts availability for 1990 Pontiac Trans Am. In addition, the cost of maintenance, including insurance, on 1990 Pontiac Trans Am would be higher. At 5,733 cc (8 cylinders), 1990 Pontiac Trans Am is equipped with a bigger engine. In terms of performance, 2009 Alpina B3 (276 HP) has 41 more horse power than 1990 Pontiac Trans Am. (235 HP). In normal driving conditions, 2009 Alpina B3 should accelerate faster than 1990 Pontiac Trans Am. With that said, vehicle weight also plays an important factor in acceleration. 1990 Pontiac Trans Am weights approximately 121 kg more than 2009 Alpina B3.

Because 2009 Alpina B3 is four wheel drive (4WD), it will have significant more traction and grip than 1990 Pontiac Trans Am. In wet, icy, snow, or gravel driving conditions, 2009 Alpina B3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1990 Pontiac Trans Am (447 Nm) has 112 more torque (in Nm) than 2009 Alpina B3. (335 Nm). This means 1990 Pontiac Trans Am will have an easier job in driving up hills or pulling heavy equipment than 2009 Alpina B3.

Compare all specifications:

2009 Alpina B3 1990 Pontiac Trans Am
Make Alpina Pontiac
Model B3 Trans Am
Year Released 2009 1990
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 3301 cc 5733 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 276 HP 235 HP
Torque 335 Nm 447 Nm
Engine Compression Ratio 10.0:1 8.5:1
Top Speed 254 km/hour 200 km/hour
Drive Type 4WD Rear
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1560 kg 1681 kg
Vehicle Length 4480 mm 4840 mm
Vehicle Width 1750 mm 1850 mm
Vehicle Height 1420 mm 1270 mm
Wheelbase Size 2730 mm 2570 mm