2009 Audi S3 vs. 1952 Austin A

To start off, 2009 Audi S3 is newer by 57 year(s). Which means there will be less support and parts availability for 1952 Austin A. In addition, the cost of maintenance, including insurance, on 1952 Austin A would be higher. At 3,992 cc (6 cylinders), 1952 Austin A is equipped with a bigger engine. In terms of performance, 2009 Audi S3 (252 HP @ 6000 RPM) has 128 more horse power than 1952 Austin A. (124 HP @ 3800 RPM). In normal driving conditions, 2009 Audi S3 should accelerate faster than 1952 Austin A. With that said, vehicle weight also plays an important factor in acceleration. 1952 Austin A weights approximately 520 kg more than 2009 Audi S3.

Because 2009 Audi S3 is four wheel drive (4WD), it will have significant more traction and grip than 1952 Austin A. In wet, icy, snow, or gravel driving conditions, 2009 Audi S3 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Audi S3 (331 Nm @ 2400 RPM) has 43 more torque (in Nm) than 1952 Austin A. (288 Nm @ 2200 RPM). This means 2009 Audi S3 will have an easier job in driving up hills or pulling heavy equipment than 1952 Austin A.

Compare all specifications:

2009 Audi S3 1952 Austin A
Make Audi Austin
Model S3 A
Year Released 2009 1952
Engine Position Front Front
Engine Size 1984 cc 3992 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 252 HP 124 HP
Engine RPM 6000 RPM 3800 RPM
Torque 331 Nm 288 Nm
Torque RPM 2400 RPM 2200 RPM
Engine Bore Size 82.5 mm 87.3 mm
Engine Stroke Size 92.8 mm 111.1 mm
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Number of Seats 4 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1455 kg 1975 kg
Vehicle Length 4220 mm 4880 mm
Vehicle Width 1410 mm 1860 mm
Vehicle Height 1770 mm 1710 mm
Wheelbase Size 2580 mm 3040 mm
Fuel Tank Capacity 60 L 34 L