2009 BMW 120 vs. 2010 Saab 05-Sep

To start off, 2010 Saab 05-Sep is newer by 1 year(s). Which means there will be less support and parts availability for 2009 BMW 120. In addition, the cost of maintenance, including insurance, on 2009 BMW 120 would be higher. At 2,290 cc (4 cylinders), 2010 Saab 05-Sep is equipped with a bigger engine. In terms of performance, 2010 Saab 05-Sep (256 HP @ 5300 RPM) has 81 more horse power than 2009 BMW 120. (175 HP @ 4000 RPM) In normal driving conditions, 2010 Saab 05-Sep should accelerate faster than 2009 BMW 120. With that said, vehicle weight also plays an important factor in acceleration. 2010 Saab 05-Sep weights approximately 252 kg more than 2009 BMW 120. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2009 BMW 120 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 BMW 120. However, in wet, icy, snow, or gravel driving conditions, 2010 Saab 05-Sep, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 BMW 120 (350 Nm @ 1750 RPM) has 92 more torque (in Nm) than 2010 Saab 05-Sep. (258 Nm @ 1900 RPM). This means 2009 BMW 120 will have an easier job in driving up hills or pulling heavy equipment than 2010 Saab 05-Sep. 2009 BMW 120 has automatic transmission and 2010 Saab 05-Sep has manual transmission. 2010 Saab 05-Sep will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 BMW 120 will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 BMW 120 2010 Saab 05-Sep
Make BMW Saab
Model 120 05-Sep
Year Released 2009 2010
Engine Position Front Front
Engine Size 1995 cc 2290 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 175 HP 256 HP
Engine RPM 4000 RPM 5300 RPM
Torque 350 Nm 258 Nm
Torque RPM 1750 RPM 1900 RPM
Engine Compression Ratio 16.0:1 9.3:1
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1326 kg 1578 kg
Vehicle Width 1430 mm 1800 mm