2009 BMW 325 vs. 2009 Ford E-250

To start off, both 2009 BMW 325 and 2009 Ford E-250 were released in the same year (2009). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 4,606 cc (8 cylinders), 2009 Ford E-250 is equipped with a bigger engine. In terms of performance, 2009 Ford E-250 (225 HP @ 4800 RPM) has 10 more horse power than 2009 BMW 325. (215 HP @ 6100 RPM) In normal driving conditions, 2009 Ford E-250 should accelerate faster than 2009 BMW 325. With that said, vehicle weight also plays an important factor in acceleration. 2009 BMW 325 weights approximately 354 kg more than 2009 Ford E-250.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Ford E-250 (388 Nm @ 3500 RPM) has 117 more torque (in Nm) than 2009 BMW 325. (271 Nm @ 4200 RPM). This means 2009 Ford E-250 will have an easier job in driving up hills or pulling heavy equipment than 2009 BMW 325.

Compare all specifications:

2009 BMW 325 2009 Ford E-250
Make BMW Ford
Model 325 E-250
Year Released 2009 2009
Body Type Sedan Van
Engine Position Front Front
Engine Size 2494 cc 4606 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 215 HP 225 HP
Engine RPM 6100 RPM 4800 RPM
Torque 271 Nm 388 Nm
Torque RPM 4200 RPM 3500 RPM
Drive Type Rear Rear
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1320 kg 966 kg
Vehicle Length 4540 mm 6030 mm
Vehicle Width 2000 mm 2020 mm
Vehicle Height 1430 mm 2140 mm
Wheelbase Size 2770 mm 3510 mm
Fuel Consumption Overall 10.5 L/100km 14.7 L/100km
Fuel Tank Capacity 63 L 132 L