2009 BMW 530 vs. 1990 Peugeot 505

To start off, 2009 BMW 530 is newer by 19 year(s). Which means there will be less support and parts availability for 1990 Peugeot 505. In addition, the cost of maintenance, including insurance, on 1990 Peugeot 505 would be higher. At 2,995 cc (6 cylinders), 2009 BMW 530 is equipped with a bigger engine. In terms of performance, 2009 BMW 530 (254 HP @ 6600 RPM) has 165 more horse power than 1990 Peugeot 505. (89 HP @ 5000 RPM). In normal driving conditions, 2009 BMW 530 should accelerate faster than 1990 Peugeot 505.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 BMW 530 (300 Nm @ 3500 RPM) has 156 more torque (in Nm) than 1990 Peugeot 505. (144 Nm @ 2750 RPM). This means 2009 BMW 530 will have an easier job in driving up hills or pulling heavy equipment than 1990 Peugeot 505. 2009 BMW 530 has automatic transmission and 1990 Peugeot 505 has manual transmission. 1990 Peugeot 505 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 BMW 530 will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 BMW 530 1990 Peugeot 505
Make BMW Peugeot
Model 530 505
Year Released 2009 1990
Engine Position Front Front
Engine Size 2995 cc 1796 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 254 HP 89 HP
Engine RPM 6600 RPM 5000 RPM
Torque 300 Nm 144 Nm
Torque RPM 3500 RPM 2750 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Automatic Manual
Vehicle Length 4850 mm 4610 mm
Vehicle Width 1470 mm 1760 mm
Vehicle Height 1850 mm 1470 mm
Wheelbase Size 2890 mm 2750 mm