2009 BMW 630 vs. 2008 Mazda 3

To start off, 2009 BMW 630 is newer by 1 year(s). Which means there will be less support and parts availability for 2008 Mazda 3. In addition, the cost of maintenance, including insurance, on 2008 Mazda 3 would be higher. At 2,996 cc (6 cylinders), 2009 BMW 630 is equipped with a bigger engine. In terms of performance, 2009 BMW 630 (268 HP @ 6700 RPM) has 11 more horse power than 2008 Mazda 3. (257 HP @ 5500 RPM). In normal driving conditions, 2009 BMW 630 should accelerate faster than 2008 Mazda 3.

Because 2009 BMW 630 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 BMW 630. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mazda 3 (380 Nm @ 3000 RPM) has 60 more torque (in Nm) than 2009 BMW 630. (320 Nm @ 2750 RPM). This means 2008 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 2009 BMW 630.

Compare all specifications:

2009 BMW 630 2008 Mazda 3
Make BMW Mazda
Model 630 3
Year Released 2009 2008
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2996 cc 2261 cc
Valves per Cylinder 4 valves 4 valves
Horse Power 268 HP 257 HP
Engine RPM 6700 RPM 5500 RPM
Torque 320 Nm 380 Nm
Torque RPM 2750 RPM 3000 RPM
Engine Bore Size 85 mm 87.5 mm
Engine Stroke Size 88 mm 94 mm
Fuel Type Gasoline - Premium Gasoline
Top Speed 250 km/hour 250 km/hour
Acceleration 0-100mph 6.2 seconds 6.1 seconds
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 5 doors
Vehicle Length 4830 mm 4680 mm
Vehicle Width 1860 mm 1790 mm
Vehicle Height 1380 mm 1440 mm
Wheelbase Size 2790 mm 2650 mm
Fuel Tank Capacity 70 L 55 L