2009 BMW M6 vs. 2008 Ford Bantam

To start off, 2009 BMW M6 is newer by 1 year(s). Which means there will be less support and parts availability for 2008 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2008 Ford Bantam would be higher. At 4,999 cc (10 cylinders), 2009 BMW M6 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2009 BMW M6 weights approximately 260 kg more than 2008 Ford Bantam.

Because 2009 BMW M6 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 BMW M6. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 BMW M6 (519 Nm @ 6100 RPM) has 409 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 2009 BMW M6 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications:

2009 BMW M6 2008 Ford Bantam
Make BMW Ford
Model M6 Bantam
Year Released 2009 2008
Body Type Coupe Pickup
Engine Position Front Front
Engine Size 4999 cc 1297 cc
Engine Cylinders 10 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 500 HP 0 HP
Torque 519 Nm 110 Nm
Torque RPM 6100 RPM 3000 RPM
Engine Compression Ratio 12.0:1 10.2:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 4 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1280 kg 1020 kg
Vehicle Length 4880 mm 4280 mm
Vehicle Width 1860 mm 1470 mm
Vehicle Height 1380 mm 1640 mm
Wheelbase Size 2790 mm 2670 mm
Fuel Consumption Overall 18.2 L/100km 8.8 L/100km
Fuel Tank Capacity 70 L 54 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]