2009 Chevrolet Epica vs. 2012 Ford Crown Victoria
To start off, 2012 Ford Crown Victoria is newer by 3 year(s). Which means there will be less support and parts availability for 2009 Chevrolet Epica. In addition, the cost of maintenance, including insurance, on 2009 Chevrolet Epica would be higher. At 4,601 cc (8 cylinders), 2012 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2012 Ford Crown Victoria (225 HP @ 4800 RPM) has 77 more horse power than 2009 Chevrolet Epica. (148 HP @ 4000 RPM) In normal driving conditions, 2012 Ford Crown Victoria should accelerate faster than 2009 Chevrolet Epica. With that said, vehicle weight also plays an important factor in acceleration. 2012 Ford Crown Victoria weights approximately 205 kg more than 2009 Chevrolet Epica. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2009 Chevrolet Epica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Ford Crown Victoria (369 Nm @ 4000 RPM) has 49 more torque (in Nm) than 2009 Chevrolet Epica. (320 Nm @ 2000 RPM). This means 2012 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2009 Chevrolet Epica. 2012 Ford Crown Victoria has automatic transmission and 2009 Chevrolet Epica has manual transmission. 2009 Chevrolet Epica will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2009 Chevrolet Epica | 2012 Ford Crown Victoria | |
| Make | Chevrolet | Ford |
| Model | Epica | Crown Victoria |
| Year Released | 2009 | 2012 |
| Body Type | Sedan | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1991 cc | 4601 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 2 valves |
| Horse Power | 148 HP | 225 HP |
| Engine RPM | 4000 RPM | 4800 RPM |
| Torque | 320 Nm | 369 Nm |
| Torque RPM | 2000 RPM | 4000 RPM |
| Engine Bore Size | 83 mm | 90.2 mm |
| Engine Stroke Size | 92 mm | 89.9 mm |
| Engine Compression Ratio | 17.5:1 | 9.4:1 |
| Fuel Type | Diesel | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 1635 kg | 1840 kg |
| Vehicle Length | 4810 mm | 5390 mm |
| Vehicle Width | 1820 mm | 2000 mm |
| Vehicle Height | 1460 mm | 1490 mm |
| Wheelbase Size | 2710 mm | 2920 mm |
| Fuel Consumption Overall | 6.3 L/100km | 11.8 L/100km |
| Fuel Tank Capacity | 65 L | 72 L |
