2009 Chrysler 300 vs. 1977 Chrysler 1610

To start off, 2009 Chrysler 300 is newer by 32 year(s). Which means there will be less support and parts availability for 1977 Chrysler 1610. In addition, the cost of maintenance, including insurance, on 1977 Chrysler 1610 would be higher. At 5,654 cc (8 cylinders), 2009 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2009 Chrysler 300 (360 HP @ 5150 RPM) has 250 more horse power than 1977 Chrysler 1610. (110 HP @ 5800 RPM). In normal driving conditions, 2009 Chrysler 300 should accelerate faster than 1977 Chrysler 1610. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler 300 weights approximately 748 kg more than 1977 Chrysler 1610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler 300 (527 Nm @ 4250 RPM) has 368 more torque (in Nm) than 1977 Chrysler 1610. (159 Nm @ 3400 RPM). This means 2009 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler 1610. 2009 Chrysler 300 has automatic transmission and 1977 Chrysler 1610 has manual transmission. 1977 Chrysler 1610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler 300 will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 Chrysler 300 1977 Chrysler 1610
Make Chrysler Chrysler
Model 300 1610
Year Released 2009 1977
Engine Position Front Front
Engine Size 5654 cc 1981 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 360 HP 110 HP
Engine RPM 5150 RPM 5800 RPM
Torque 527 Nm 159 Nm
Torque RPM 4250 RPM 3400 RPM
Engine Bore Size 99.5 mm 91.7 mm
Engine Stroke Size 92 mm 75 mm
Engine Compression Ratio 9.5:1 9.5:1
Top Speed 250 km/hour 175 km/hour
Drive Type Rear Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1873 kg 1125 kg
Vehicle Length 5020 mm 4540 mm
Vehicle Width 1890 mm 1740 mm
Vehicle Height 1480 mm 1450 mm
Wheelbase Size 3050 mm 2680 mm
Fuel Tank Capacity 72 L 65 L