2009 Chrysler 300 vs. 2010 Mitsubishi Eclipse
To start off, 2010 Mitsubishi Eclipse is newer by 1 year(s). Which means there will be less support and parts availability for 2009 Chrysler 300. In addition, the cost of maintenance, including insurance, on 2009 Chrysler 300 would be higher. At 2,736 cc (6 cylinders), 2009 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2009 Chrysler 300 (178 HP @ 5500 RPM) has 16 more horse power than 2010 Mitsubishi Eclipse. (162 HP @ 6000 RPM). In normal driving conditions, 2009 Chrysler 300 should accelerate faster than 2010 Mitsubishi Eclipse. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler 300 weights approximately 393 kg more than 2010 Mitsubishi Eclipse. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2009 Chrysler 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2009 Chrysler 300. However, in wet, icy, snow, or gravel driving conditions, 2010 Mitsubishi Eclipse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler 300 (258 Nm @ 4000 RPM) has 39 more torque (in Nm) than 2010 Mitsubishi Eclipse. (219 Nm @ 4000 RPM). This means 2009 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 2010 Mitsubishi Eclipse. 2009 Chrysler 300 has automatic transmission and 2010 Mitsubishi Eclipse has manual transmission. 2010 Mitsubishi Eclipse will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2009 Chrysler 300 | 2010 Mitsubishi Eclipse | |
| Make | Chrysler | Mitsubishi |
| Model | 300 | Eclipse |
| Year Released | 2009 | 2010 |
| Body Type | Sedan | Coupe |
| Engine Position | Front | Front |
| Engine Size | 2736 cc | 2400 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 178 HP | 162 HP |
| Engine RPM | 5500 RPM | 6000 RPM |
| Torque | 258 Nm | 219 Nm |
| Torque RPM | 4000 RPM | 4000 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1873 kg | 1480 kg |
| Vehicle Length | 5010 mm | 4582 mm |
| Vehicle Width | 1890 mm | 1834 mm |
| Vehicle Height | 1490 mm | 1359 mm |
| Wheelbase Size | 3050 mm | 2576 mm |
| Fuel Consumption Highway | 9.1 L/100km | 8.4 L/100km |
| Fuel Consumption City | 13.1 L/100km | 11.8 L/100km |
| Fuel Tank Capacity | 68 L | 67 L |
