2009 Chrysler Sebring vs. 1962 Fiat 500

To start off, 2009 Chrysler Sebring is newer by 47 year(s). Which means there will be less support and parts availability for 1962 Fiat 500. In addition, the cost of maintenance, including insurance, on 1962 Fiat 500 would be higher. At 2,360 cc (4 cylinders), 2009 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2009 Chrysler Sebring (173 HP @ 6000 RPM) has 151 more horse power than 1962 Fiat 500. (22 HP @ 4400 RPM). In normal driving conditions, 2009 Chrysler Sebring should accelerate faster than 1962 Fiat 500. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler Sebring weights approximately 1425 kg more than 1962 Fiat 500. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Fiat 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Fiat 500. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler Sebring (225 Nm @ 4400 RPM) has 189 more torque (in Nm) than 1962 Fiat 500. (36 Nm @ 3500 RPM). This means 2009 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1962 Fiat 500. 2009 Chrysler Sebring has automatic transmission and 1962 Fiat 500 has manual transmission. 1962 Fiat 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 Chrysler Sebring 1962 Fiat 500
Make Chrysler Fiat
Model Sebring 500
Year Released 2009 1962
Body Type Sedan Coupe
Engine Position Front Rear
Engine Size 2360 cc 499 cc
Engine Cylinders 4 cylinders 2 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 173 HP 22 HP
Engine RPM 6000 RPM 4400 RPM
Torque 225 Nm 36 Nm
Torque RPM 4400 RPM 3500 RPM
Engine Bore Size 86 mm 67.4 mm
Engine Stroke Size 101 mm 70 mm
Engine Compression Ratio 9.0:1 7.1:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1910 kg 485 kg
Vehicle Length 4850 mm 2980 mm
Vehicle Width 1810 mm 1330 mm
Vehicle Height 1510 mm 1330 mm
Wheelbase Size 2770 mm 1850 mm
Fuel Tank Capacity 64 L 38 L