2009 Chrysler Sebring vs. 1962 Lancia Appia
To start off, 2009 Chrysler Sebring is newer by 47 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 2,358 cc (4 cylinders), 2009 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2009 Chrysler Sebring (173 HP @ 6000 RPM) has 121 more horse power than 1962 Lancia Appia. (52 HP @ 4900 RPM). In normal driving conditions, 2009 Chrysler Sebring should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler Sebring weights approximately 923 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1962 Lancia Appia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Lancia Appia. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler Sebring (225 Nm @ 4400 RPM) has 138 more torque (in Nm) than 1962 Lancia Appia. (87 Nm @ 3500 RPM). This means 2009 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2009 Chrysler Sebring has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Chrysler Sebring | 1962 Lancia Appia | |
Make | Chrysler | Lancia |
Model | Sebring | Appia |
Year Released | 2009 | 1962 |
Engine Position | Front | Front |
Engine Size | 2358 cc | 1090 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 173 HP | 52 HP |
Engine RPM | 6000 RPM | 4900 RPM |
Torque | 225 Nm | 87 Nm |
Torque RPM | 4400 RPM | 3500 RPM |
Engine Bore Size | 86 mm | 68 mm |
Engine Stroke Size | 101 mm | 75 mm |
Engine Compression Ratio | 9.5:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1873 kg | 950 kg |
Vehicle Length | 4850 mm | 4160 mm |
Vehicle Width | 1810 mm | 1520 mm |
Vehicle Height | 1510 mm | 1330 mm |
Wheelbase Size | 2770 mm | 2520 mm |
Fuel Consumption Overall | 9.8 L/100km | 10.1 L/100km |
Fuel Tank Capacity | 64 L | 42 L |