2009 Chrysler Sebring vs. 1968 Holden Belmont
To start off, 2009 Chrysler Sebring is newer by 41 year(s). Which means there will be less support and parts availability for 1968 Holden Belmont. In addition, the cost of maintenance, including insurance, on 1968 Holden Belmont would be higher. At 2,399 cc (4 cylinders), 2009 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2009 Chrysler Sebring (171 HP @ 6000 RPM) has 95 more horse power than 1968 Holden Belmont. (76 HP @ 4400 RPM). In normal driving conditions, 2009 Chrysler Sebring should accelerate faster than 1968 Holden Belmont. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler Sebring weights approximately 430 kg more than 1968 Holden Belmont. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Holden Belmont is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Holden Belmont. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler Sebring (166 Nm @ 4400 RPM) has 3 more torque (in Nm) than 1968 Holden Belmont. (163 Nm @ 4400 RPM). This means 2009 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1968 Holden Belmont. 2009 Chrysler Sebring has automatic transmission and 1968 Holden Belmont has manual transmission. 1968 Holden Belmont will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2009 Chrysler Sebring | 1968 Holden Belmont | |
| Make | Chrysler | Holden |
| Model | Sebring | Belmont |
| Year Released | 2009 | 1968 |
| Engine Position | Front | Front |
| Engine Size | 2399 cc | 2130 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 171 HP | 76 HP |
| Engine RPM | 6000 RPM | 4400 RPM |
| Torque | 166 Nm | 163 Nm |
| Torque RPM | 4400 RPM | 4400 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Vehicle Weight | 1630 kg | 1200 kg |
| Vehicle Length | 4850 mm | 4700 mm |
| Vehicle Width | 1810 mm | 1830 mm |
| Vehicle Height | 1550 mm | 1420 mm |
| Wheelbase Size | 2770 mm | 2830 mm |
