2009 Chrysler Sebring vs. 2012 Ford Crown Victoria
To start off, 2012 Ford Crown Victoria is newer by 3 year(s). Which means there will be less support and parts availability for 2009 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2009 Chrysler Sebring would be higher. At 4,605 cc (8 cylinders), 2012 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2012 Ford Crown Victoria (224 HP @ 4750 RPM) has 70 more horse power than 2009 Chrysler Sebring. (154 HP @ 6300 RPM) In normal driving conditions, 2012 Ford Crown Victoria should accelerate faster than 2009 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2012 Ford Crown Victoria weights approximately 1221 kg more than 2009 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Ford Crown Victoria (359 Nm @ 4000 RPM) has 169 more torque (in Nm) than 2009 Chrysler Sebring. (190 Nm @ 5100 RPM). This means 2012 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2009 Chrysler Sebring. 2012 Ford Crown Victoria has automatic transmission and 2009 Chrysler Sebring has manual transmission. 2009 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Chrysler Sebring | 2012 Ford Crown Victoria | |
Make | Chrysler | Ford |
Model | Sebring | Crown Victoria |
Year Released | 2009 | 2012 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1998 cc | 4605 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 154 HP | 224 HP |
Engine RPM | 6300 RPM | 4750 RPM |
Torque | 190 Nm | 359 Nm |
Torque RPM | 5100 RPM | 4000 RPM |
Engine Compression Ratio | 10.5:1 | 8.5:1 |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 6 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1635 kg | 2856 kg |
Vehicle Length | 4860 mm | 5390 mm |
Vehicle Width | 1850 mm | 1970 mm |
Vehicle Height | 1500 mm | 1450 mm |
Wheelbase Size | 2770 mm | 2920 mm |
Fuel Consumption Overall | 7.8 L/100km | 11.8 L/100km |
Fuel Tank Capacity | 63 L | 72 L |