2009 Chrysler Sebring vs. 2013 Toyota Tacoma
To start off, 2013 Toyota Tacoma is newer by 4 year(s). Which means there will be less support and parts availability for 2009 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 2009 Chrysler Sebring would be higher. At 2,736 cc (6 cylinders), 2009 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2009 Chrysler Sebring (187 HP @ 5500 RPM) has 30 more horse power than 2013 Toyota Tacoma. (157 HP @ 5200 RPM). In normal driving conditions, 2009 Chrysler Sebring should accelerate faster than 2013 Toyota Tacoma. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler Sebring weights approximately 296 kg more than 2013 Toyota Tacoma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Toyota Tacoma is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Toyota Tacoma. However, in wet, icy, snow, or gravel driving conditions, 2009 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Chrysler Sebring (259 Nm @ 4000 RPM) has 15 more torque (in Nm) than 2013 Toyota Tacoma. (244 Nm @ 3800 RPM). This means 2009 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 2013 Toyota Tacoma. 2009 Chrysler Sebring has automatic transmission and 2013 Toyota Tacoma has manual transmission. 2013 Toyota Tacoma will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Chrysler Sebring will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2009 Chrysler Sebring | 2013 Toyota Tacoma | |
| Make | Chrysler | Toyota |
| Model | Sebring | Tacoma |
| Year Released | 2009 | 2013 |
| Body Type | Convertible | Pickup |
| Engine Position | Front | Front |
| Engine Size | 2736 cc | 2700 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Valves per Cylinder | 4 valves | 4 valves |
| Horse Power | 187 HP | 157 HP |
| Engine RPM | 5500 RPM | 5200 RPM |
| Torque | 259 Nm | 244 Nm |
| Torque RPM | 4000 RPM | 3800 RPM |
| Engine Bore Size | 86 mm | 95 mm |
| Engine Stroke Size | 78.5 mm | 95 mm |
| Engine Compression Ratio | 9.9:1 | 10.0:1 |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | 5-speed manual |
| Number of Seats | 4 seats | 4 seats |
| Number of Doors | 2 doors | 4 doors |
| Vehicle Weight | 1910 kg | 1614 kg |
| Vehicle Length | 4930 mm | 5286 mm |
| Vehicle Width | 1820 mm | 1835 mm |
| Vehicle Height | 1490 mm | 1670 mm |
| Wheelbase Size | 2770 mm | 3246 mm |
| Fuel Consumption Highway | 9.1 L/100km | 7.7 L/100km |
| Fuel Consumption City | 13.1 L/100km | 10 L/100km |
| Fuel Tank Capacity | 64 L | 80 L |
