2009 Fiat Panda vs. 1980 Steyr G-series

To start off, 2009 Fiat Panda is newer by 29 year(s). Which means there will be less support and parts availability for 1980 Steyr G-series. In addition, the cost of maintenance, including insurance, on 1980 Steyr G-series would be higher. At 2,746 cc (6 cylinders), 1980 Steyr G-series is equipped with a bigger engine. In terms of performance, 1980 Steyr G-series (148 HP @ 5250 RPM) has 89 more horse power than 2009 Fiat Panda. (59 HP @ 5000 RPM) In normal driving conditions, 1980 Steyr G-series should accelerate faster than 2009 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1980 Steyr G-series weights approximately 1035 kg more than 2009 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1980 Steyr G-series (226 Nm @ 4250 RPM) has 124 more torque (in Nm) than 2009 Fiat Panda. (102 Nm @ 2500 RPM). This means 1980 Steyr G-series will have an easier job in driving up hills or pulling heavy equipment than 2009 Fiat Panda.

Compare all specifications:

2009 Fiat Panda 1980 Steyr G-series
Make Fiat Steyr
Model Panda G-series
Year Released 2009 1980
Engine Size 1242 cc 2746 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 59 HP 148 HP
Engine RPM 5000 RPM 5250 RPM
Torque 102 Nm 226 Nm
Torque RPM 2500 RPM 4250 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Manual
Vehicle Weight 965 kg 2000 kg
Vehicle Length 3580 mm 4240 mm
Vehicle Width 1610 mm 1770 mm
Vehicle Height 1640 mm 1940 mm
Wheelbase Size 2310 mm 2410 mm