2009 Fiat Panda vs. 2011 Ford Crown Victoria
To start off, 2011 Ford Crown Victoria is newer by 2 year(s). Which means there will be less support and parts availability for 2009 Fiat Panda. In addition, the cost of maintenance, including insurance, on 2009 Fiat Panda would be higher. At 4,601 cc (8 cylinders), 2011 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2011 Ford Crown Victoria (225 HP @ 4800 RPM) has 172 more horse power than 2009 Fiat Panda. (53 HP @ 5000 RPM) In normal driving conditions, 2011 Ford Crown Victoria should accelerate faster than 2009 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2011 Ford Crown Victoria weights approximately 925 kg more than 2009 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2011 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2011 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 2009 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Ford Crown Victoria (369 Nm @ 4000 RPM) has 281 more torque (in Nm) than 2009 Fiat Panda. (88 Nm @ 2750 RPM). This means 2011 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 2009 Fiat Panda. 2011 Ford Crown Victoria has automatic transmission and 2009 Fiat Panda has manual transmission. 2009 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2011 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Fiat Panda | 2011 Ford Crown Victoria | |
Make | Fiat | Ford |
Model | Panda | Crown Victoria |
Year Released | 2009 | 2011 |
Body Type | Hatchback | Sedan |
Engine Position | Front | Front |
Engine Size | 1107 cc | 4601 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 53 HP | 225 HP |
Engine RPM | 5000 RPM | 4800 RPM |
Torque | 88 Nm | 369 Nm |
Torque RPM | 2750 RPM | 4000 RPM |
Engine Bore Size | 70 mm | 90.2 mm |
Engine Stroke Size | 72 mm | 89.9 mm |
Engine Compression Ratio | 9.6:1 | 9.4:1 |
Fuel Type | Gasoline - Premium | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 915 kg | 1840 kg |
Vehicle Length | 3540 mm | 5390 mm |
Vehicle Width | 1600 mm | 2000 mm |
Vehicle Height | 1550 mm | 1490 mm |
Wheelbase Size | 2310 mm | 2920 mm |
Fuel Consumption Overall | 5.7 L/100km | 11.8 L/100km |
Fuel Tank Capacity | 35 L | 72 L |