2009 Fiat Panda vs. 2013 BMW ActiveHybrid 7
To start off, 2013 BMW ActiveHybrid 7 is newer by 4 year(s). Which means there will be less support and parts availability for 2009 Fiat Panda. In addition, the cost of maintenance, including insurance, on 2009 Fiat Panda would be higher. At 2,979 cc (6 cylinders), 2013 BMW ActiveHybrid 7 is equipped with a bigger engine. In terms of performance, 2013 BMW ActiveHybrid 7 (311 HP @ 5800 RPM) has 239 more horse power than 2009 Fiat Panda. (72 HP @ 6000 RPM) In normal driving conditions, 2013 BMW ActiveHybrid 7 should accelerate faster than 2009 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2013 BMW ActiveHybrid 7 weights approximately 1073 kg more than 2009 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 BMW ActiveHybrid 7 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 BMW ActiveHybrid 7. However, in wet, icy, snow, or gravel driving conditions, 2009 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 BMW ActiveHybrid 7 (447 Nm @ 4500 RPM) has 316 more torque (in Nm) than 2009 Fiat Panda. (131 Nm @ 4250 RPM). This means 2013 BMW ActiveHybrid 7 will have an easier job in driving up hills or pulling heavy equipment than 2009 Fiat Panda. 2013 BMW ActiveHybrid 7 has automatic transmission and 2009 Fiat Panda has manual transmission. 2009 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 BMW ActiveHybrid 7 will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Fiat Panda | 2013 BMW ActiveHybrid 7 | |
Make | Fiat | BMW |
Model | Panda | ActiveHybrid 7 |
Year Released | 2009 | 2013 |
Body Type | Hatchback | Sedan |
Engine Position | Front | Front |
Engine Size | 1368 cc | 2979 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 72 HP | 311 HP |
Engine RPM | 6000 RPM | 5800 RPM |
Torque | 131 Nm | 447 Nm |
Torque RPM | 4250 RPM | 4500 RPM |
Engine Bore Size | 72 mm | 84 mm |
Engine Stroke Size | 84 mm | 89 mm |
Engine Compression Ratio | 11.0:1 | 10.2 :1 |
Fuel Type | Gasoline - Premium | Gasoline |
Top Speed | 185 km/hour | 240 km/hour |
Acceleration 0-100mph | 9.6 seconds | 4.9 seconds |
Drive Type | Front | Rear |
Transmission Type | Manual | 8-speed automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 1050 kg | 2123 kg |
Vehicle Length | 3580 mm | 5214 mm |
Vehicle Width | 1610 mm | 2134 mm |
Vehicle Height | 1570 mm | 1481 mm |
Wheelbase Size | 2310 mm | 3210 mm |
Fuel Tank Capacity | 35 L | 76 L |