2009 Ford Fusion vs. 1955 Mercedes-Benz 300

To start off, 2009 Ford Fusion is newer by 54 year(s). Which means there will be less support and parts availability for 1955 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1955 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1955 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1955 Mercedes-Benz 300 (215 HP @ 5800 RPM) has 55 more horse power than 2009 Ford Fusion. (160 HP @ 6250 RPM) In normal driving conditions, 1955 Mercedes-Benz 300 should accelerate faster than 2009 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 1955 Mercedes-Benz 300 weights approximately 327 kg more than 2009 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1955 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2009 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Mercedes-Benz 300 (275 Nm @ 4600 RPM) has 63 more torque (in Nm) than 2009 Ford Fusion. (212 Nm @ 4250 RPM). This means 1955 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2009 Ford Fusion. 2009 Ford Fusion has automatic transmission and 1955 Mercedes-Benz 300 has manual transmission. 1955 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Ford Fusion will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 Ford Fusion 1955 Mercedes-Benz 300
Make Ford Mercedes-Benz
Model Fusion 300
Year Released 2009 1955
Engine Position Front Front
Engine Size 2260 cc 2996 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 160 HP 215 HP
Engine RPM 6250 RPM 5800 RPM
Torque 212 Nm 275 Nm
Torque RPM 4250 RPM 4600 RPM
Engine Compression Ratio 10.3:1 8.6:1
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 966 kg 1293 kg
Vehicle Length 4840 mm 4530 mm
Vehicle Width 1840 mm 1800 mm
Vehicle Height 1460 mm 1310 mm
Wheelbase Size 2730 mm 2410 mm
Fuel Tank Capacity 66 L 100 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]