2009 Ford Fusion vs. 1960 Mercedes-Benz 300
To start off, 2009 Ford Fusion is newer by 49 year(s). Which means there will be less support and parts availability for 1960 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1960 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1960 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1960 Mercedes-Benz 300 (238 HP @ 5800 RPM) has 17 more horse power than 2009 Ford Fusion. (221 HP @ 6250 RPM) In normal driving conditions, 1960 Mercedes-Benz 300 should accelerate faster than 2009 Ford Fusion. With that said, vehicle weight also plays an important factor in acceleration. 1960 Mercedes-Benz 300 weights approximately 420 kg more than 2009 Ford Fusion. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1960 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1960 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2009 Ford Fusion, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Ford Fusion (278 Nm @ 4800 RPM) has 7 more torque (in Nm) than 1960 Mercedes-Benz 300. (271 Nm @ 4600 RPM). This means 2009 Ford Fusion will have an easier job in driving up hills or pulling heavy equipment than 1960 Mercedes-Benz 300. 2009 Ford Fusion has automatic transmission and 1960 Mercedes-Benz 300 has manual transmission. 1960 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Ford Fusion will be easier to drive especially in heavy traffic.
Compare all specifications:
2009 Ford Fusion | 1960 Mercedes-Benz 300 | |
Make | Ford | Mercedes-Benz |
Model | Fusion | 300 |
Year Released | 2009 | 1960 |
Engine Position | Front | Front |
Engine Size | 2965 cc | 2996 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 221 HP | 238 HP |
Engine RPM | 6250 RPM | 5800 RPM |
Torque | 278 Nm | 271 Nm |
Torque RPM | 4800 RPM | 4600 RPM |
Engine Compression Ratio | 10.8:1 | 7.6:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 966 kg | 1386 kg |
Vehicle Length | 4840 mm | 4530 mm |
Vehicle Width | 1840 mm | 1800 mm |
Vehicle Height | 1460 mm | 1310 mm |
Wheelbase Size | 2730 mm | 2410 mm |
Fuel Tank Capacity | 66 L | 100 L |