2009 GMC Acadia vs. 1976 Datsun 280Z

To start off, 2009 GMC Acadia is newer by 33 year(s). Which means there will be less support and parts availability for 1976 Datsun 280Z. In addition, the cost of maintenance, including insurance, on 1976 Datsun 280Z would be higher. At 3,598 cc (6 cylinders), 2009 GMC Acadia is equipped with a bigger engine. In terms of performance, 2009 GMC Acadia (288 HP @ 6300 RPM) has 138 more horse power than 1976 Datsun 280Z. (150 HP @ 5600 RPM). In normal driving conditions, 2009 GMC Acadia should accelerate faster than 1976 Datsun 280Z. With that said, vehicle weight also plays an important factor in acceleration. 2009 GMC Acadia weights approximately 837 kg more than 1976 Datsun 280Z. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2009 GMC Acadia is four wheel drive (4WD), it will have significant more traction and grip than 1976 Datsun 280Z. In wet, icy, snow, or gravel driving conditions, 2009 GMC Acadia will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 GMC Acadia (366 Nm @ 3400 RPM) has 145 more torque (in Nm) than 1976 Datsun 280Z. (221 Nm @ 4400 RPM). This means 2009 GMC Acadia will have an easier job in driving up hills or pulling heavy equipment than 1976 Datsun 280Z. 2009 GMC Acadia has automatic transmission and 1976 Datsun 280Z has manual transmission. 1976 Datsun 280Z will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 GMC Acadia will be easier to drive especially in heavy traffic.

Compare all specifications:

2009 GMC Acadia 1976 Datsun 280Z
Make GMC Datsun
Model Acadia 280Z
Year Released 2009 1976
Body Type SUV Hatchback
Engine Position Front Front
Engine Size 3598 cc 2753 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type V in-line
Horse Power 288 HP 150 HP
Engine RPM 6300 RPM 5600 RPM
Torque 366 Nm 221 Nm
Torque RPM 3400 RPM 4400 RPM
Engine Bore Size 96 mm 86.1 mm
Engine Stroke Size 83.1 mm 79 mm
Engine Compression Ratio 10.0:1 8.3:1
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Automatic Manual
Number of Seats 7 seats 4 seats
Number of Doors 5 doors 3 doors
Vehicle Weight 2141 kg 1304 kg
Vehicle Length 5100 mm 4399 mm
Vehicle Width 1990 mm 1631 mm
Wheelbase Size 3030 mm 2304 mm
Fuel Tank Capacity 83 L 60 L