2009 Hummer H2 vs. 1970 Seat 600
To start off, 2009 Hummer H2 is newer by 39 year(s). Which means there will be less support and parts availability for 1970 Seat 600. In addition, the cost of maintenance, including insurance, on 1970 Seat 600 would be higher. At 6,198 cc (8 cylinders), 2009 Hummer H2 is equipped with a bigger engine. In terms of performance, 2009 Hummer H2 (393 HP @ 5700 RPM) has 364 more horse power than 1970 Seat 600. (29 HP @ 5500 RPM). In normal driving conditions, 2009 Hummer H2 should accelerate faster than 1970 Seat 600. With that said, vehicle weight also plays an important factor in acceleration. 2009 Hummer H2 weights approximately 2293 kg more than 1970 Seat 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2009 Hummer H2 is four wheel drive (4WD), it will have significant more traction and grip than 1970 Seat 600. In wet, icy, snow, or gravel driving conditions, 2009 Hummer H2 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2009 Hummer H2 (563 Nm @ 4300 RPM) has 516 more torque (in Nm) than 1970 Seat 600. (47 Nm @ 3500 RPM). This means 2009 Hummer H2 will have an easier job in driving up hills or pulling heavy equipment than 1970 Seat 600.
Compare all specifications:
2009 Hummer H2 | 1970 Seat 600 | |
Make | Hummer | Seat |
Model | H2 | 600 |
Year Released | 2009 | 1970 |
Engine Position | Front | Rear |
Engine Size | 6198 cc | 767 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 393 HP | 29 HP |
Engine RPM | 5700 RPM | 5500 RPM |
Torque | 563 Nm | 47 Nm |
Torque RPM | 4300 RPM | 3500 RPM |
Drive Type | 4WD | Rear |
Vehicle Weight | 2903 kg | 610 kg |
Vehicle Length | 4830 mm | 3300 mm |
Vehicle Width | 2070 mm | 1390 mm |
Vehicle Height | 2020 mm | 1360 mm |
Wheelbase Size | 3130 mm | 2010 mm |